Allows user to read barometric pressure and temperature via i2c interfaceAPI Reference
How To Connect
Install the package with:
go get gobot.io/x/gobot
You must pass in an Adaptor that supports the
i2c.Connector interface to use with this Driver.
You can use the following optional params if you wish to change the I2C Bus and I2C Address from the default values.
i2c.WithBus(int): bus to use with this driver.
i2c.WithAddress(int): address to use with this driver
// default bus/address bpm180 := i2c.NewBMP180Driver(adaptor) // optional bus/address bpm180 := i2c.NewBMP180Driver(adaptor, i2c.WithBus(0), i2c.WithAddress(0x34))
How To Use
Example using a BMP180 barometric pressure and temperature sensor.
// code here